background image

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

R

WOODBRIDGE 

www.woodbridgebath.com

 

8

                                                 

 

  

 

  

 

 

 

 

 

DANGER Sign: RISK OF SEVERE INJURY FROM ELECTRIC SHOCK OR DEATH 
FROM ELECTROCUTION!

CAUTION Sign: IMPORTANT INSTALLATION GUIDE AND MAINTENANCE TIPS 
TO BE FOLLOW PER MANUFACTURE.

WARNING:

1. In order to prevent 

fi

re or electrical shock, DO NOT expose the control box on rain or wet environment. 

    Control box contains dangerous high voltage parts and DO NOT open the control box.  This product to 
    be service by cer

fi

ed technician only.

2. Any modi

fi

ca on or se ng to the controller without authoriza on or con

fi

rmaion from manufacture or 

    its dealer might cause mal func onto the product.

CAUTION:

1. Follow the instruc ons on this manual to operate.
2. Please keep this installa on manual for future reference a er installa on. Please contact your local   
    authorize dealer or call our customer service support for any assistance with opera on or maintenance 
    -related ques on.

OPERATION TIPS:

1. Unplug the socket from electric outlet if the product will not be used in a period.
2. Make sure the wiring and connec on are well connected per manufacture before turning on the unit.
3. Place this controller on dry and ven la on area, cleared from heat, sunshine, mechanical vibra on, 
    moisture, dust and any radia on object.

 DO:

1. Take at least 30 seconds ON and OFF from last operate, this will extend the unit life cycle.
2. Power o

 the unit a er every use.

3. Follow the voltage and electrical speci

fi

ca on guide from manufacture to prevent any mal func on or 

    damage to the unit.
4. Follow installa on instruc on per manufacture to prevent any mal func on or damage to the unit.
5. Turn ON the unit again if accidentally shut down.

Summary of Contents for B0090
















Reviews: