3.4 DUST EXTRACTION
The chip and dust aspiration device must ensure a minimal rate of air delivery of 1800 m3/h at a speed of 25-30 m/sec.
The machine is equipped with a shavings collector, which has an end sleeve for connection to the aspirator for the saw-
dust and the shavings.
Connect the shavings collector with a tubing of Ø 100 mm to the aspirator for saw-dust and shavings.
3.3 NOISE LEVEL
No load Load
Sound Pressure Level < 80dB(A) < 90dB(A)
Sound Power Level < 90dB(A) < 100dB(A)
The noise levels measured are emission levels and not necessarily the safe working level. Although there is a
correlation between the emission levels and the exposure levels, this cannot be used reliably to determine whether or
not further precautions are required. The factors which affect the actual level of operator exposure include the duration
of exposure, the ambient characteristics and other sources of emission, for example, the number of machines and
other adjacent machining. The permitted exposure values may also vary from country to country. Nevertheless, this
information allows the user of the machine to better evaluate the dangers and risks.
Other factors which reduce exposure to noise are:
- correct tool choice
- tool and machine maintenance
- use of hearing protection systems (e.g. headsets, earplugs,...)
WARNING
Please always use the hearing protection systems.
The dust and chips collection device must be switched on simultaneously with the motor
of the machine.
4.1 CONTENTS OF PACKAGE
4. INSTALLATION
CAUTION
Assembly need to be done by an experienced and trained person.
WARNING
-8-
A. Jointer Top
B. Fence
C. Fence Slide Bracket Assembly
D. Drive Belt
E. Push Blocks (2)
F. Cutterhead Guard
G. Outfeed Table Knob
H. Fence Tilt Handle
I. Fence Mounting Bracket
J. Jointer Stand & Motor Assembly
K. Dust Port
L. Switch & Switch Post Assembly
M. M8 x 45 Allen Bolt (x4)
N. M8 x 40 Allen Bolt (x4)
O. M5 x 10 Phillips Screw (x4)
P. M8 Flat Washer (x8)
Q. M8 Lock Washer (x8)
R. M5 Flat Washer (x4)
S. Fence Angle Gauge
T. Wrenches (not shown)
K
L
