3
ATTACH DUST CHUTES
Get the set of Dust Chutess
(6000F)
and insert two 3/4” flat head screws
(MF010)
, thru the two holes in each Dust
Chute, then start an oval nut
(5760B -
flat side first)
on the ends of the screws.
Attach a 1-7/8” Double Track
(4002)
to
each oval nut and loosely tighten for now.
Install a washer
(WS002)
on four
1-1/4” bolts
(HB040)
. Insert the bolts thru
the holes shown in the pair of phenolic
sides
(6000S)
and start an oval nut
(5760B
- smooth side first)
on the ends of the bolts.
Slide the front Dust Chute without
the cutout on to the inner most oval
nuts on the sides and tighten the bolts,
then loosen and retighten the screws
holding the Dust Chute. Repeat for the
rear Dust Chute with the cutout.
HB040 x4
WS002 x4
5760B x8
MF010 x4
60
0F
x2
-
Du
st
Ch
ute
s
32.49
