Spacing between the Stop Assemblies
set to fit over opposite ends of a
door or unassembled cabinet side
3
Spacing between the Stop Assemblies set to fit
between the top and bottom of an assembled cabinet.
Outside Stop Indexing Bushings removed.
Using The Jig:
Place the Head Assembly indexing bushings against the edge of the part and "hook" the Stop Assembly bushings on two
corners of the part, or between the parts, to position the Marking Jigs where needed, then mark the hardware locations. Since the
indexing bushings are in the same location on both sides of the Jig, it can be flipped to go from left to right or top to bottom.
2
©Copyright WOODHAVEN INC. 11/13/14
(800) 344-6657 or WWW.WOODHAVEN.COM
