Sharpener Operator’s Manual
4. SHARPENING
With the machine now setup for the blade to be sharpened, follow the steps
below to begin sharpening the teeth.
A. ADVANCE THE BLADE
Lift the grind head and while holding the advancer up, manually pull the blade back through until
the weld seam is
right
of the grinding disc. Turn on the advancer toggle switch, advance the
blade through until the weld seam is just
left
of the grinding disc, and then turn the switch off.
BBS-MY2020-EN: Rev A
Page
of
37
52
19-May-2020
Advance the blade until
weld seam is just left of
the grinding disc
Rotate grinding
head up
Advancer toggle
switch
on
until weld
seam is left of disc,
then switch
off.
Summary of Contents for BANDSAW BLADE SHARPENER
