W1
W19
S2
W20
2. Wooden boards (if necessary) can be treated with
wax or oil
before assembly.
Our tip:
Untreated bed is better for the
environment of the room (regulating humidity in the air). Also you can save money and it is easier to clean and repair! Furthermore,
untreated wood is easier for the childrens hand to grip and better for the maintenance of natural colour.
3. For the assembly of the bunk bed the following
tools
are required: a ratchet with size 10 socket, a cross-end screwdriver (better
yet a cordless
screwdriver
with a changeable head and
size 10 attachment
) and a
hammer
. An assistant is necessary when
assembling the corner posts.
1. Before you start with the assembly take a look at each diagram. Every important beams have
stickers
on the end of the beam
so that you could easily recognise them. Please use the
beam list
as an additional help. Also there is a label on the boxes to
indicate the content of the box.
Before you start:
Safety rail Z25
Safety rail Z26
Safety rail
Z26
Safety rail Z24
screwed from inside
Safety rail
Z27
Assembly Instructions for AMARILLO Pos. 504
B1-B16
B17-B32
W16
W15
W17
Z11
W3
Z30
Z31
W7
S1
S8
S7
W18
W13
W2
W14
W1
P1
S6
S5
S2
Beams S1,S5,S6 and
S8 with round
indentations should
face the inside of
the bed.
S3
S4
F2
F3
F1
Z4
W23
W11
W12
W10
W21
W22
The side on W-Beams with
the most round indentations
should face the inside of the
bed.
Hole for wall
attachment
Safety rail Z25
screwed from outside
W19
W20
W9
W8
Diagram 1.1
1.
3.
2.
Not all specifications are guaranteed.
© Copyrights by WOODLAND 1998
S7
S2
Z30
Z31
W14
W1
W19
W8
W1
Z31
Z30
W8
W19
S2
S7
W2
W17
S1
S8
W14
W20
W9
W13
W1
Z31
Z30
W8
S7
W2
W14
W9
W13
S1
S2
W19
W20
W17
W15
S8
S5
S6
W3
W10
W12
W7
110mm Flathead Bolt
The top side of the mattress
should not go over the
marking on the beam S1.
R
flange
nut M6
