page 14
Starting and Stopping a Run
After closing the centrifuge lid, press “START” button to start operation and press
“STOP/OPEN” button to stop ongoing operation.
Pressing the
will stop the operation as well as it will open the
“STOP/OPEN” button
centrifuge lid automatically once the rotor comes to stop.
Time Adjustment and Timer Operation
The run time can be set from 1 minutes to 99 minutes.
Press “TIME” button once to select time setting and press Increment or
Decrement button to change the run time. Every single press of increment or
decrement button will change the speed by 1 minute.
Timer is a countdown timer and once the set speed is reached, the timer starts the
countdown.
The unit will run for a maximum of 99 minutes and will then shut off automatically.
The ongoing centrifugation may also be terminated by pressing the “STOP/OPEN”
button. The remaining time after the termination of ongoing centrifugation will be
shown in the time display.
Speed Adjustment/ RCF Display
The speed can be set from 500 RPM to 12000 RPM. & user can also set as per RCF
value.
Single Press “SPEED/RCF” button to select speed setting in RPM and press
Increment or Decrement button to change speed. Long press
“SPEED/RCF”
button to select speed setting in RCF and press Increment or Decrement button
to change speed.
If speed selected is in RPM mode, then the LED adjacent to RPM will glow and if
speed selected is in RCF mode, then the LED adjacent to RCF will glow.
Single press
to change the speed value in 1000 RPM.
“SPEED/RCF” button
Double press
to change the speed value in 100 RPM.
“SPEED/RCF” button
Summary of Contents for Clinispin MPC
Page 1: ...Operator s Manual CLINISPIN MPC Multi Purpose Centrifuge Rev 1 0...
Page 2: ......
Page 19: ......
