10
4)
Main II Board: Control the running stages of centrifugal motor, control the function of
heating film and provide external connection interfaces (such as USB, COM port, etc.)
The main functions implemented between different boards:
Optical Signal Path: After the optical signal reaches the Si-photodiode sensor, it is
processed by the NOB board and transmitted to the Main II board. Then, it is transmitted
to the Main I board and enters the core board for data processing and calculation.
Motor Signal Path: The motor is connected to the Main II board through the motor transfer
board card and the motor signal is acquired and controlled.
Interactive Path of External Data: External data passes through each port (USB, LAN port,
etc.). Transmission to the Main II board and then to the Main I board on the core board for
processing.
1.7
Software Introduction
Refer to the InSight V-CHEM Operator’s Manual to find the basic functions of the software.
This manual mainly introduces the use of the auxiliary function used for a diagnosis and
repair.
Help Function:
1)
The help function is mainly used to guide the operator through the process of adding a
sample, as shown below:
1.
Enter the
Main Interface
and select
the
Help
to enter the
operation of adding sample.
Summary of Contents for InSight V-CHEM
Page 1: ...Veterinary Chemistry Analyser Service Manual...
Page 9: ...3 Back View Right View...
Page 42: ...36...
