Operating instructions
GB
OPERATING INSTRUCTIONS
1.Start the machine
As soon as the machine is powered on the first time, a buzzer is heard. Present indoor humidity is shown in the
display. Press ON/OFF to start the machine.
2.Stop machine
Press ON/OFF to stop the dehumidifier.
Do not unplug the power cord directly to force the machine to stop working
3. Water drainage
The dehumidifier has both an automatic and manual drainage function. If you would like to store the machine
or drain water at will, press DRAIN to drain the water.
PUMP TROUBLE WARNING
If there are any problems with the water pump, a warning sound is heard, the display show E2 and the dehumidifier
shuts off. The pump has to be repaired before the unit can be used.
DRAINAGE PIPE CONNECTION
The water pipe is 6.5 meters long and 10mm thick. Connect one end of the pipe to the dehumidifier and lead the
other end to a drain. If the drain is located above the dehumidifier, the maximum capacity of the water pump is
3,8 m. If the water is drained downwards, there is no limit for the distance.
NOTE!
The dehumidifier has a memory function. In the event of a power failure, the dehumidifier will continue to work
according to last set values when the power returns.
AIR DUCT CONNECTOR
1. The drainage air duct connector should
correspond to the hole, push from downside.
2. To dissemble, use your thumb to press the
outer side plate inwards. Let the buckle out of
the plate hole and fetch the drainage air duct
connector.
Installation: rotate the drainage
heat pipe counter-clockwise
Dissemble: rotate the drainage
heat pipe clockwise.
