8
3. INSTALLATION & PLACEMENT
3.1 Before using the product
• Gently unpack the product and remove
all packing materials from the product.
• Make sure to keep the product box
for future use, for example if the unit
needs servicing.
• Before using the product for the first
time, let it stand in room temperature
for half of an hour.
• Use clear water, temperature not
exceeding 40°C
• Check the water basin, make sure it is
clear and clean.
3.2 Placement
•
Place the product in the room you
want to humidify. Note that the
product is not designed to humidify
an entire apartment or house. The
product will work best if used in a
room with closed doors and windows
and with minimal ventilation.
•
Place the machine on a flat surface.
If it is placed on an uneven surface, it
might not function properly.
•
Check if the rated voltage meets the
input voltage, and plug the unit into a
power outlet.
4. OPERATING INSTRUCTIONS
4.1 Filling the water tank
1. Turn the child safety lock on the side
of the product to unlock the water
tank.
Unlocked
Locked
2. Remove the water tank by removing
the top cover and pulling on the
handle underneath the cover.
3. Turn the water tank upside down and
unscrew the plug.
4. Fill the water tank with fresh, cold
water. Preferrably distilled or
pre-boiled water.
5. Rescrew the plug and put the water
tank back. Put the top cover back
and turn the child lock to fix the water
tank in place.
NOTE: There is always some water left in
the bottom of the unit when the water tank
is removed. This is normal.
4.2 Using the humidifier
Operate the humidifier with the control
panel on the unit or by using the remote
control. Buttons, settings and functions
are the same on both control panel and
remote control.
THE REMOTE CONTROL
Before you use the remote control make
sure it is equipped with a CR2025 3V
battery. The correct battery is included
with the product. If the remote control
doesn’t work properly, replace its battery
with a new one and try again.
English
