background image

F-8045 MM & Boundary (Rev. 12/1/2008)

Woods Equipment 

Company

2606 South Illinois Route 2 

Post Office Box 1000

Oregon, Illinois 61061
800-319-6637 tel

800-399-6637 fax

www.WoodsEquipment.com

LIMITED WARRANTY

(Mow’n Machine

TM

 Zero-Turn Mowers and Woods Boundary

TM

 Utility Vehicles)

Please Enter Information Below and Save For Future Reference

.

Date Purchased:  __________________________

From (Dealer):______________________________________

Model Number:  __________________________

Serial Number: _____________________________________

WHAT IS COVERED: 

Woods Equipment Company (“WOODS”) warrants Mow’n Machine

TM

 zero-turn mowers and attachments and Woods Boundary

TM

 utility

vehicles, accessories and attachments to be free from defect in material and workmanship for the warranty periods listed below.

FOR HOW LONG: 

Mow’n Machine Model #CZ1736K, CZ1948K, CZ1952K, CZ2361, ME1952K, ME2661B, MZ2552K, MZ2561K, MZ2761, MZ3761K,

MZ3772K, MZ2661KL & attachments are warranted for two (2) years from the date of delivery to the original purchaser or 2000 hours of

operation, whichever occurs first. Purchaser may opt for a warranty of five (5) years from the date of delivery to the original purchaser or 500

hours of operation, whichever occurs first. The dealer must specify the special warranty term on the original, dated bill of sale and a copy must

be provided with all warranty claims. Mow’n Machine model numbers CZR2242B and CZR2652B are warranted for residential use for three (3)

years from the date of delivery to the original purchaser or for commercial use for 90 days from the date of delivery to the original purchaser..
Mow’n Machine Model #FE21B, FZ21D, FZ23B, FZ25D, FZ28K & attachments are warranted for two (2) years from the date of delivery to the

original purchaser or 2000 hours of operation, whichever occurs first.
In addition, Mow’n Machine ME and MZ Series Models, serial number XXXXXXXX300 and above, have a Limited Lifetime Warranty on deck,

deck cradle, and engine deck for the life of the machine to the original retail purchaser.
Woods Boundary utility vehicle Model #MAV350, MAV480, MAV4x4, accessories & attachments are warranted for two (2) years from the date

of delivery to the original purchaser.
IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION

TO THE DURATION OF THE WRITTEN WARRANTY PERIODS LISTED ABOVE. Some states do not allow limitations on how long an

implied warranty lasts, so the above limitation may not apply to you.

WHO IS COVERED: 

This Warranty is extended solely to the original purchaser of the product. Should the original purchaser sell or otherwise transfer the product to a

third party, this Warranty does not transfer to the third party purchaser in any way. There are no third party beneficiaries of this Warranty.

WHAT IS NOT COVERED:

This Warranty does not cover normal wear or tear, or normal maintenance items, or any damage, failure or loss caused by: 

1. Improper operation, improper maintenance, misuse, or an accident; 
2. Any modification or repair by someone other than WOODS, a WOODS’ authorized dealer or distributor, and/or a WOODS’

authorized service center; or

3. Repairs made with parts other than those obtained through WOODS.

WOODS makes no warranty, express or implied, with respect to engines, batteries, tires or other parts or accessories with respect to which the

manufacturer provides a separate warranty.

WHAT WOODS WILL DO TO CORRECT PROBLEMS: 

WOODS’ obligation under this Warranty is limited to, at WOODS’ option, the repair or replacement, free of charge, of the product if the product

is defective or in noncompliance with this Warranty. The product must be returned to WOODS with proof of purchase within thirty (30) days

after such defect or noncompliance is discovered or should have been discovered, routed through the dealer and distributor from whom the

purchase was made, transportation charges prepaid. WOODS shall complete such repair or replacement within a reasonable time after WOODS

receives the product. 

OTHER LIMITATIONS:
WOODS shall not be liable for any incidental or consequential losses, damages or expenses, arising directly or indirectly from the

product, whether such claim is based upon breach of contract, breach of warranty, negligence, strict liability in tort or any other legal

theory. 

Without limiting the foregoing, WOODS shall not be liable for any damages relating to (i) lost profits, business, revenues or goodwill;

(ii) any expense or loss incurred for labor, supplies, substitute machinery or rental; or (iii) any other type of damage to property or economic loss.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
No agent, representative, dealer, distributor, service person, salesperson, or employee of any company, including without limitation, WOODS, its

authorized dealers, distributors, and service centers, is authorized to alter, modify, or enlarge this Warranty.

HOW STATE LAW APPLIES: 

This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

QUESTIONS: 

Answers to any questions regarding warranty service and locations may be obtained by contacting:

Summary of Contents for 872515G











































Reviews: