8
Safety
MM F-Series (Rev. 8/1/2008
(Safety Rules continued from previous page)
Tighten all bolts, nuts, and screws to torque
chart specifications. Check that all cotter pins are
installed securely to ensure equipment is in a safe
condition before putting unit into service.
Use care to prevent battery acid from contacting
skin.
Make sure all safety decals are installed.
Replace if damaged. (See Safety Decals section for
location.)
Make sure shields and guards are properly
installed and in good condition. Replace if damaged.
Battery posts, terminals, wiring insulation, and
related accessories contain lead and lead com-
pounds, chemicals known to the State of California
to cause cancer and birth defects or other repro-
ductive harm. WASH HANDS AFTER HANDLING.
STORAGE
Keep children and bystanders away from stor-
age area.
Never store equipment where fuel or fumes
could reach an open flame or spark. Allow engine
to cool before storing in an enclosure.
Never store the machine or fuel container near
an open flame, spark or pilot light such as on a
water heater or other appliance.
Do not run engine indoors. Exhaust gases con-
tain carbon monoxide, an odorless and deadly poi-
son.
Remove key and store in a secure location to
prevent unauthorized persons from operating
equipment.
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Summary of Contents for MOW'N MACHINE FZ22K
