INSTALLATION,OPERATION & MAINTENANCE
Woodson Contact Toaster – Split Lid WGPC62
Tel: 1300 79 1954 Web: www.stoddart.com.au Email: fse@stoddart.com.au
Due to continuous product research and development, the information contained herein is subject to change without notice
Page 16
WARNING!
The external surfaces of this unit are NOT waterproof, do NOT hose.
WARNING!
DO NOT pour water directly onto the platen surface.
NOTE!
Toaster should be moved in front of operating grill exhausts to perform clean.
Cleaning Procedure
1. Turn toaster off and remove electric cord from power point
2. Wipe soil from the toaster using a clean sanitised towel and small amount of water to rinse the platens using a
damp cloth. Continually rinse the towel in hot water and thoroughly rinse all platens. Wipe over unit with a
clean dry cloth.
3. Remove crumb tray. Dry wipe crumb tray and then wash, rinse and sanitise. Air-dry and replace.
External Surfaces
Clean the stainless steel and metal parts with warm (not hot) soapy water and a sponge.
Rinsed the stainless steel and metal parts with clean, fresh water.
After cleaning, thoroughly wipe the stainless steel and metal parts dry with a soft cloth. Do NOT let water
pool on the unit. Check crevices and folds.
Internal Surfaces
Clean the internal surfaces with warm (not hot) soapy water and a sponge.
After cleaning, thoroughly wipe the stainless steel and elements with a soft cloth.