Woodstar 3908203952, Original Manual

22 / GB

•  All safety and hazard instructions at the 

machine must be kept in a legible condi-
tion.

•  Use the machine only in perfect working 

condition and according to its intended 
purpose, as well as adequate consid-
eration of safety aspects and hazards in 
compliance with this operating manual. 
All malfunctions which might affect safety 

must be (allowed to be) rectified imme

-

diately!

•  The safety, work and maintenance in-

structions of the manufacturer as well as 
the dimensions indicated in the technical 
data must be followed.

•  The relevant accident prevention regula-

tions and other, generally accepted safety 
rules must be followed.

•  The machine may be used, serviced or 

repaired only by people, who are familiar 
with it and are instructed about the haz-

ards.  Independent  modifications  to  the 

machine exclude liability of the manu-
facturer for resulting damage.

•  The machine may be used only with origi-

nal accessories and tools of the manu-
facturer.

•  Despite intended purpose, certain resid-

ual risk factors cannot be fully excluded. 
Due to the design and setup of the ma-
chine, the following points may arise:

•  Hearing damage when not using the nec-

essary hearing protection.

•  Injuries to the eye when not using eye 

protection

•  Any other use is considered improper. 

The manufacturer does not assume liabil-
ity for resulting damage; the associated 
risk is solely borne by the plant operator.

Note: 
•  Avoid body contact with grounded surfaces 

such as pipes or radiators.

•  Be vigilant. Do not work on the machine 

when you are tired.

• 

Do not operate the product under the influ

-

ence of alcohol or drugs. Read the warning 
notice to determine if your sense of judge-

ment or reflexes may be impaired.

•  Nonslip footwear is recommended.
•  Protect long hair using appropriate means.

Wear eye and ear protection. Always wear:

•  ANSI-approved dust respirators. 
•  Hearing protection.
•  Keep your balance at any time. 

m 

 Proper Use

The machine conforms to the current EC 
Machinery Directive

•  Before starting work, all protective and 

safety devices should have been installed 
on the machine.

•  The machine is designed for operation by 

one person. The operator is responsible 
for third parties in the work area.

•  Observe all safety and hazard instruc-

tions at the machine.

•  The device is designed for heavy demoli-

tion and chiselling work using an appro-
priate chisel.

•  The machine may be operated only ac-

cording to its intended use. Any use other 
than that intended is improper. It is not 
the manufacturer but the user / operator 
who is liable for any damage or injuries 
caused.

•  Please note that our equipment have not 

been designed for use in commercial, 
trade or industrial applications. We do not 
assume any liability if it is used in com-
mercial, trade or industrial businesses or 
any other equivalent activity.