Woodster SL90LXU, Translation Of The Original Instruction Manual

GB | 23 

In addition to the safety instructions contained in this 

operating manual and the specific regulations of your 

country, the technical rules generally accepted for the 

operation of machines of the same type must be ob-

served.

We accept no liability for damage or accidents which 

arise due to non-observance of these instructions and 

the safety information.

2. 

Device description (fig. 1-22)

1.  Handle

2.  ON/OFF switch

3.  Lock switch

4.  Machine head

5.  Moving saw blade guard

6.  Saw blade

7.  Clamping device

8.  Workpiece support

9.  Set screw for workpiece support

10.  Table insert

11.  Handle / Set screw for rotary table

12.  Pointer

13.  Scale

14.  Rotary table

15.  Fixed saw table

16.  Stop rail

16a. Movable stop rail

16b. Set screw

17.  Sawdust bag

18.  Scale

19.  Pointer

20.  Set screw for drag guide

21.  Drag guide

22.  Set screw

23.  Locking bolt

24.  Screw for cutting depth limiting

25.  Stop for cutting depth limiting

26.  Adjusting screw (90°)

27.  Adjusting screw (45°)

28.  Flange screw

29. 

Outer flange

30.  Saw shaft lock

31. 

Inner flange

32.  Laser

33.  ON/OFF switch laser

34.  Guide bracket

35.  Latched position lever

36.  Tilt protection

A.)  90° stop angle (not supplied)

B.)  45° stop angle (not supplied)

C.)  Allen key, 6 mm

D.)  Allen key, 3 mm

E.)  Philips head screw (Laser)

1.  Introduction

Manufacturer:

Woodster GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

we hope your new tool brings you much enjoyment 

and success.

Note:

According to the applicable product liability laws, the 

manufacturer of the device does not assume liability 

for damages to the product or damages caused by the 

product that occurs due to:

•  Improper handling,

•  Non-compliance of the operating instructions,

•  Repairs by third parties, not by authorized service 

technicians,

•  Installation and replacement of non-original spare 

parts,

• 

Application other than specified,

•  A breakdown of the electrical system that occurs 

due to the non-compliance of the electric regulations 

and VDE regulations 0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the 

device.

The operating instructions are intended to help the 

user to become familiar with the machine and take ad-

vantage of its application possibilities in accordance 

with the recommendations.

The operating instructions contain important informa-

tion on how to operate the machine safely, profession-

ally and economically, how to avoid danger, costly 

repairs, reduce downtimes and how to increase reli-

ability and service life of the machine.

In addition to the safety regulations in the operating 

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in 

your country.

Keep the operating instructions package with the 

machine at all times and store it in a plastic cover to 

protect it from dirt and moisture. Read the instruction 

manual each time before operating the machine and 

carefully follow its information.

The machine can only be operated by persons who 

were instructed concerning the operation of the ma-

chine and who are informed about the associated 

dangers. The minimum age requirement must be 

complied with.