Woodster SL90LXU, Translation Of The Original Instruction Manual

24 | GB

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial appli-

cations. Our warranty will be voided if the equipment 

is used in commercial, trade or industrial businesses 

or for equivalent purposes.

5.  Safety information

General safety information for power tools

m

WARNING!  Read all safety warnings, instruc-

tions, illustrations and technical data provided 

with this power tool.

 Failure to follow the warnings 

and instructions may result in electric shock, fire and/

or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” used in the safety instructions 

refers to mains powered power tools (with power cord) 

and cordless power tools (without power cord).

Workplace safety

a)  Keep your workplace clean and well illumi-

nated.

Disorderliness and poorly illuminated workplaces 

may Iead to accidents.

b)  Do not operate the power tool in explosive at-

mospheres with inflammable liquids, gases or 

dust.

Power tools generate sparks which may ignite 

dust or vapours.

c)  Keep children and other persons away from 

the power tool during operation.

You may lose control of the tool if you are dis-

tracted.

Electric safety

a) 

The  plug  of  the  power  tool  must  fit  into  the 

socket.

Do not modify the plug in any way. Do not use 

adapter plugs together with grounded power tools. 

Unmodified  plugs  and  matching  sockets  reduce 

the risk of electric shock.

b)  Avoid body contact with grounded surfaces 

such as pipes, radiators, ovens and refrig-

erators. There is an increased risk of electric 

shock if your body is grounded.

c)  Keep power tools away from rain or humidity. 

Water permeation into the power tool will increase 

the risk of electric shock.

d)  Use the cable solely for its intended purpose. 

Do not use the cable to carry or hang up the 

power tool or to pull out the plug from the 

socket.

Keep the cable away from heat, oil, sharp edges 

or moving machine parts. Damaged or twisted 

cables increase the risk of electric shock.

3.  Scope of delivery

•  Crosscut, drag and mitre saw

•  1 x Clamping device (7) (preassembled)

•  2 x Workpiece support (8) (preassembled)

•  Sawdust bag (17)

•  Allen key 6 mm (C)

•  Allen key 3 mm (D)

•  Sawblade

•  Operating manual

4.  Intended use

The crosscut, drag and mitre saw is designed to 

crosscut wood and plastic respective of the machine’s 

size. The saw is not designed for cutting firewood.

Warning!

 Do not use the saw to cut materials other 

than those specified described in manual.

Warning!

 The supplied saw blade is only intended for 

the sawing of wood! Do not use this blade for the saw-

ing of firewood!

The equipment is to be used only for its prescribed 

purpose. Any other use is deemed to be a case of 

misuse. The user / operator and not the manufacturer 

will be liable for any damage or injuries of any kind 

caused as a result of this.

The equipment is to be operated only with suitable 

saw blades. It is prohibited to use any type of cutting-

off wheel.

To use the equipment properly you must also observe 

the safety information, the assembly instructions and 

the operating instructions to be found in this manual.

All persons who use and service the equipment have 

to be acquainted with this manual and must be in-

formed about the equipment’s potential hazards. It 

is also imperative to observe the accident prevention 

regulations in force in your area. The same applies for 

the general rules of health and safety at work.

The manufacturer will not be liable for any changes 

made to the equipment nor for any damage resulting 

from such changes. Even when the equipment is used 

as prescribed it is still impossible to eliminate certain 

residual risk factors. The following hazards may arise 

in connection with the machine’s construction and de-

sign:

•  Contact with the saw blade in the uncovered saw 

zone.

•  Reaching into the running saw blade (cut injuries).

•  Kick-back of workpieces and parts of workpieces.

•  Saw blade fracturing.

•  Catapulting of faulty carbide tips from the saw blade.

• 

Damage to hearing if ear-muffs are not used as nec

-

essary.

•  Harmful emissions of wood dust when used in 

closed rooms.