Standard Safety Instructions
-
4
-
READ MANUAL BEFORE OPERATING MACHINE
FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL
RESULT IN PERSONAL INJURY
1. Thoroughly read the instruction manual before operating your machine.
Learn the applications,
limitations and potential hazards of this machine. Keep manual in a safe, convenient place for
future reference.
2. Keep work area clean and well lighted.
Clutter and inadequate lighting invite potential hazards.
3. Ground all tools.
If a machine is equipped with a three-prong plug, it must be plugged into a
three-hole electrical outlet or grounded extension cord. If using an adapter to aid in accommodat-
ing a two-hole receptacle, ground the adapter using a screw to a known ground.
4. Wear eye protection at all times.
Use safety glasses with side shields or safety goggles, meeting
the national safety standards, while operating this machine.
5. Avoid dangerous environments. DO NOT
operate this machine in wet or open flame environ-
ments. Airborne dust particles could cause an explosion and severe fire hazard.
6. Ensure all guards are securely in place
and in working condition.
7. Make sure switch is in the “OFF” position
before connecting power to machine.
8. Keep work area clean;
free of clutter, grease, etc.
9. Keep children and visitors away.
All visitors should be kept at a safe distance away while operat-
ing unit.
10. Childproof workshop
with padlocks, master switches or by removing starter keys.
11. Disconnect machine when cleaning, adjusting or servicing.
Indicates an imminently hazardous situation which, if not avoided, WILL
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, COULD
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, MAY
result in minor or moderate injury and damage to the machine. It may
also be used to alert against unsafe practices.
This symbol is used to alert the user to useful information about proper
operation of the equipment.
NOTICE
SAFETY
SAFETY
Summary of Contents for SHOP FOX W1667
