-36-
Model W1686 (For Machines Mfd. Since 11/10)
PA
RT
S
PARTS
Main
95
76
77
99
96
71
70
107
45
22
108
8
111
86
110
34
111
33
33
32
107
26
109
23
28
29
28
99
99
99
99
100
30
101
27
25
19
18
114
113
79
97
64
2
20
30
31
31
112
103
92
35V2
35-1
105
104
106
78
83V2
76
15
95
16
90
90
92
75
80
102
92
7
91
92
82
85
84V2
72
81
122
117
118
5
21
99
99
24
91
98
17
92
92
92
14
91
92
92
14
16
15
12
94
6
93
93
93
13
11
94
94
124
125
126
123V2
86-2
86-1
86-6
86-3
86-4
86-8
86-5
86-7
CHECK OIL
LEVEL BEFORE
STARTING THIS MACHINE!
REFER TO OWNER’S MANUAL
FOR OIL TYPE AND
CAPACITIES.
129
Specifications
MODEL W1686
OSCILLATING SPINDLE SANDER
WARNING!
Manufactured for Woodstock in Taiwan
Date
Serial Number
Motor: 1 HP, 120/240V, Single-Phase,
60Hz, Prewired 120V
Max. Amp Draw: 12A@120V, 6A@240V
Spindle Speed: 1725 RPM
Oscillation Speed: 72 SPM
Stroke Length: 1-1/2"
Table Tilt: 45° Front, 20° Back
Gear Oil Wt./Capacity: 90 Wt / 4.5 Qts.
Weight: 313 lbs.
To reduce the risk of serious personal injury while using this machine:
1. Read and understand manual before starting machine.
2. Always wear eye protection and a dust mask or respirator.
3. Plug power cord into grounded outlet only.
4. Do not wear loose clothing, gloves or jewelry. Roll up or button
long sleeves, and tie back long hair.
5. Do not use when tired or under the influence of drugs or alcohol.
6. Only operate machine on flat, level ground.
7. Make sure machine is set up and adjusted correctly before use.
8. Do not touch sanding spindle while it is in motion.
9. Do not sand wood with loose knots/large splinters.
10. Always sand against the rotation of the spindle.
11. Maintain a firm, controlled grip on the workpiece.
12. Use holding jigs or clamps for small workpieces.
13. Stop machine and disconnect power before clearing jammed
pieces, making adjustments, or servicing.
14. Do not allow children unsupervised access to the machine.
15. Do not expose to dampness or use in a wet environment.
177335
128
• Do not expose to rain or use in damp
locations.
• AVERTISSEMENT!: Ne pas exposer à la
pluie et ne pas utiliser dans les
emplacements humides.
• If connected to a circuit protected by fuses, use a
time-delay fuse marked “D”.
• Si cette machine est connectée à un circuit protégé
par des fusibles, employer des fusibles à action
différée marqués «D».
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
130
Summary of Contents for Shop Fox W1686
Page 41: ...Model W1686 For Machines Mfd Since 11 10...
Page 44: ......
