-15-
Model W1687 (For Machines Mfg. Since 9/11)
SE
TU
P
8.
Wrap a foam strip around the outside top rim of the
collector (see
Figure.12
).
Figure.12.
Installing foam strip around top
of collector.
9.
Trim
any excess from foam strip so the ends come
together evenly, as shown in
Figure.13
.
10.
Wrap a foam strip around the outside bottom rim
of the collector and trim the excess, as shown in
Figure.14
.
Install the remaining foam strips on the other side.
Figure.14.
Foam strip installed around
bottom of collector.
Narrow
Foam Strip
Figure.13.
Ends of foam strip trimmed to
come together evenly.
Foam Strips
Ends Even