1.4
Safety
1.4.1
Intended Use
The easYgen unit has been designed and constructed solely for the intended use
described in this Operation Manual and – with even more details – in the Technical
Manual.
• Intended use requires operation of the control unit within the range outlined in the
written specifications.
• Steps to be taken for commissioning are outlined in the Technical Manual.
• Intended use includes compliance with all instructions and safety notes presented in
this manual.
• Any use which exceeds or differs from the intended use shall be considered improper
use.
• No claims for any kind for damage will be considered if such claims result from
improper use.
NOTICE!
Damage due to improper use!
Improper use of the remote panel unit may cause damage to the control unit as well as to
the connected components.
Improper use includes, but is not limited to:
• Operation outside the specified operating conditions.
1.4.2
Personnel
WARNING!
Hazards due to insufficiently qualified personnel!
If unqualified personnel perform work on or with the control unit hazards may arise which
can cause serious injury and substantial damage to property.
• Therefore, all work must only be carried out by appropriately qualified personnel.
This manual specifies the personnel qualifications required for the different areas of work,
listed below:
• Well trained for electrical installations.
• Aware of the local safety regulations.
• Experienced in working with electronic measuring and control devices.
• Allowed to manage the controlled (engine/generator) system.
7
easYgen-1700
37888A
1 General Information
1.4 Safety
