ID
Parameter
CL
Setting range
[Default]
Description
The control unit will function as a 2 CB unit. The control unit performs full con-
trol like synchronizing, opening and closing the GCB and the MCB with gener-
ator and engine protection. The GCB/MCB perform also full load transfer via
open/closed transition, interchange and parallel mode. All necessary inputs
and outputs are assigned and pre-defined.
Notes
Original parameter 3401 is still present as visualization value in the controller.
7458
7459
7460
7461
Breaker transi-
tion mode
2
Parallel / Inter-
change / Closed
Transit. / Open
Tranistion /
External
[Parallel]
The control unit automatically controls the two breakers (MCB and GCB).
Notes
This parameter
only
applies to application mode
.
For a detailed explanation for each mode refer to 'Chapter: Configuration' in
easYgen-2200/2500 manual (37535).
The unit provides two alternative transition modes, which may be activated
temporarily via the LogicsManager and override the transition mode config-
ured in this parameter.
Original parameter 3411 is still present as visualization value in the controller.
12985
Parameter Set
2
1
Determined by
LogicsManager
[(0 & 1) & 1]
Once the conditions of the LogicsManager have been fulfilled, parameter set
2 will be enabled.
Notes
The default "Parameter Set 1" is used, if more than one parameter set is ena-
bled simultaneously.
12986
Parameter Set
3
1
Determined by
LogicsManager
[(0 & 1) & 1]
Once the conditions of the LogicsManager have been fulfilled, parameter set
3 will be enabled.
Notes
The default "Parameter Set 1" is used, if more than one parameter set is ena-
bled simultaneously.
12987
Parameter Set
4
1
Determined by
LogicsManager
[(0 & 1) & 1]
Once the conditions of the LogicsManager have been fulfilled, parameter set
4 will be enabled.
Notes
The default "Parameter Set 1" is used, if more than one parameter set is ena-
bled simultaneously.
Additional Functionality
Configuration > Switchable Parameter Sets
37537
easYgen-2500 Rental (Option K33) | Genset Control
20
Summary of Contents for easYgen-2500
