background image

 

37630 easYgen-3000XT Flash Instruction 

  

w w w . w o o d w a r d . c o m 

10 

We appreciate your comments about the content of our publications. 

Please send comments to: stgt-doc@woodward.com 

Please reference publication 37630. 

 
 
 

Homepage 

www.woodward.com 

 

 
 
 
 
 

Woodward has company-owned plants, subsidiaries, and branches,  

as well as authorized distributors and other authorized service and sales facilities throughout the world. 

Complete address / phone / fax / email information for all locations is available on our website. 

 

 

 

THE INFORMATION CONTAINED IN THIS APLLICATION NOTE IS PROVIDED AS IS WITHOUT REPRESENTATIONS OR WARRANTIES OF 
ANY KIND EXPRESSED OR IMPLIED. THE ADHERENCE TO THE INFORMATION CONTAINED IN THIS APPLICATION NOTE SHALL BE AT 
THE USER’S OWN RISK. WOODWARD EXPRESSLY DISCLAIMS ANY REPRESENTATIONS OR WARRANTIES CONCERNING WHETHER 
THE  DELIVERABLES,  OR  SOFTWARE  WILL  PRODUCE  ANY  SPECIFIC  RESULT  OR  PERFORM  ANY  PARTICULAR  FUNCTION. 
WOODWARD FURTHER EXPRESSLY DISCLAIMS ANY LIABILITY FOR DAMAGES, LOSSES, COSTS OR EXPENSES ARISING DIRECTLY 
OR  INDIRECTLY  FROM  THE  USE  OF  THIS  APPLICATION  NOTE,  UNLESS  WOODWARD  HAS  PROVABLY  ACTED  WITH  WILLFUL 
MISCONDUCT OR GROSS NEGLIGENCE. 
WOODWARD RESERVES THE RIGHT TO UPDATE ANY PORTION OF THIS PUBLICATION AT ANY TIME. INFORMATION PROVIDED BY 
WOODWARD IS BELIEVED TO BE CORRECT AND RELIABLE. HOWEVER, NO RESPONSIBILITY IS ASSUMED BY WOODWARD UNLESS 
OTHERWISE EXPRESSLY UNDERTAKEN. 

Released

Summary of Contents for EGCP-2 to easYgen-3200XT











Reviews: