Smart View
If the message »Warning, invalid connection settings« appears during
establishing the connection, this indicates that the connection adjustments
you have chosen are not correct.
On this warning you can react as follows:
»Yes«: (to set up the connection completely new).
By this, all adjustments are cancelled and the connection assistant is
opened again for renewed adjustment of the connection to the device.
This procedure is advisable in case basic adjustments cannot be modified
via the characteristics dialogue (e.g. if a new additional serial interface has
been installed on the system).
»No«: (to modify the existing dial-up network entry).
Opens the dialogue for characteristics of the connection settings. During
the dialogue it is possible to correct invalid settings (e.g. the recommended
baud rate).
»Cancel«:
The warning is ignored and the connection adjustments remain as they are.
This procedure is accepted for a limited time, but in such a case, the user is
obliged to establish a correct connection later on.
Page 58
EN MRU4 10/09
