TD_PCM1x_Packages_Function/Operation_08.04_GB 15
WARNING
The engine may start unintentionally if an alarm, which caused the engine to shut down, is acknowledged and an
enabling is still present. Before acknowledging the alarm, check the cause of the alarm, in order to protect operating
personnel located in the vicinity of the system against injuries, and to protect the engine against unintentional destruc-
tion.
⇒
If the cause of the alarm is not known or is unclear, NEVER press the acknowledge push-button! The destruction of
the engine cannot otherwise be ruled out !
27 RESET
Color: blue
Acknowledgement
With this button the alarm messages are acknowledged, i. e., the alarm indica-
tions on the LC display disappear and the "Alarm" LED goes out. The operating
variable display is set on the basic screen. Alarm class F2 and F3 alarms can only
be acknowledged in the "STOP" and "MANUAL" operating modes..
2.5 LC
Display
28 LC-Display
LC
display
The LC display shows messages and values, depending on the respective mode
applied. In configuration mode, the individual parameters are displayed and
changed. In Automatic mode the operating variables (e. g. voltages and currents)
can be called up.