Manual WIP1 GB
Woodward
DOK-TD-WIP1 Rev.F
37
6.6 System parameters
6.6.1 Selection of the language
>>>>>SYSTEM<<<<<
>>>>SETTINGS<<<<
Language for the messages displayed is either German or English.
>>>PARAMETER<<<<
Language_English
The language can be chosen by push buttons <+> and <->.
6.6.2 Password programming
This is the menu for changing an existing password.
>>>Parameter<<<<
_New_Password_?_
This inquiry is acknowledged by push button <ENTER>. By pressing push button <SELECT/RESET> this
procedure is stopped and the next parameter is indicated.
Name_old________
Password_!_xxxx_
To activate a new password, the existing one has to be entered first.
_1st_input______
_Password:_xxxx_
The new password can be entered by push buttons <SELECT/RESET>, <ENTER>, <+> and <->. The place
for entering the information is marked by the letter „x“ on the display.
_2nd_Feed_______
_Password:_xxxx_
The password entered here must correspond with the one entered before. If this is not the case, the follow-
ing message is displayed:
>>>Parameter<<<<
Incorrect_Input_
By shortly pressing the <SELECT/RESET> key, the new password can be entered again. When the right
password is entered, this is acknowledged by the fol-lowing message:
New_Password____
is_active_!_____
By pressing the <SELECT/RESET> push button, the next parameter is indicated.
