Manual WIP1 GB
Woodward
DOK-TD-WIP1 Rev.F
38
6.6.3 Date setting
The cursor underneath the date displayed signals that the date can be changed. For setting the correct day
push buttons <+> and <-> are to be used. At first input of the correct password is required. The set value
then to be acknowledged by the <ENTER> push button or proceeding to the next parameter by the
<SELECT/RESET> push button. The same procedure applies for setting month and year.
>>>>Parameter<<<
Date_16.04.1997_
6.6.4 Time setting
The same procedure applies for setting the time.
>>>Parameter<<<<
Time____11:56:08
6.6.5 Rated frequency setting
The adapted FFT algorithm requires the rated frequency of the object to be protected as a parameter for ex-
act digital sampling and filtering of the input currents. Displayed is either "f
N
= 50 Hz" or „f
N
= 60 Hz“.
Rated_Frequency_
fN_50_Hz________
The rated frequency required can be adjusted by <+> or <-> and then saved by <ENTER>.
6.6.6 Adjustment of the slave address (WIP1-3)
>>Slave_Adress<<
No._=__1________
By pressing keys <+> or <-> the slave address can be set within a range from 1 - 32.
6.6.7 Baud Rate setting (WI1-3)
>>>>Baud_Rate<<<
___9600_Baud____
The baud rate can be set by keys <+> and <-> and then be saved by pressing <ENTER>.