20 | UM-BS-EN-A3
3.3
Electrical Connection
IMPORTANT:
The power cord must be properly protected at all times, both when in use and storage.
Below are the standard electrical requirements by region. There are different options depending on
which model you own. If you have a different electrical configuration, please contact your sales
representative.
DO NOT BEND OR REMOVE PRONGS
. The plugs are polarized, meaning the prongs are different sizes
and the plug can only fit in the outlet one way; if the plug does not fit, reverse the plug. If other power
cord plugs are required, please contact WOODWAY.
Before connecting the treadmill to the power supply, the information on main voltage and frequency
(found on the name plate) is to be compared with the on-site connection values. Only connect the
device if the values match. Power surges or voltage drops can cause malfunctions or defects in the
device.
No other treadmills or devices may be operated on the same supply line. Each treadmill must be
operated with its own circuit breaker. The treadmill must be grounded.
DANGER
Danger of Death by Electric Shock!
Improper handling of electrical equipment by unqualified persons can cause
fatal electrical shock.
►
If necessary, allow only qualified personnel to perform electrical installation.
►
The power cord must not come into contact with hot surfaces or sharp
edges.
►
Electrical parts (e.g. motor, power cord, and power switch) must not come
in contact with water.
