32 | UM-BS-EN-A3
8.1
Cleaning
Periodic cleaning and inspection of your WOODWAY BOOST will help lengthen its life while keeping it
looking like new. With this preventative maintenance it will be easier to identify possible issues that
might otherwise be overlooked.
Below is a guideline of recommended cleaning and maintenance intervals.
DANGER
Danger of Death by Electric Shock!
The use of water and liquid detergents as part of cleaning can cause
serious or fatal electrical shock.
►
No liquids may come in contact with electrical parts such as motor,
power cord, power switch, and control monitors.
►
Do not spray the device with a water jet.
►
Pull power plug before cleaning; equipment must not be connected to
power! Ensure the device cannot be switched back on.
The running surface should be thoroughly cleaned at regular intervals, depending on the intensity of
use.
Remove light dirt and dust with a soft cloth. Dirt can be removed with damp cloth. After cleaning dry
with a dry cloth!
8.1.1
Cleaning Notes
•
Do not use abrasive brushes or abrasive cleaners, as the paint and plastic surfaces can be
scratched.
•
Do not use sharp tools (e.g. knife, metal scraper) or aggressive cleaning solvents for cleaning.
•
Clean all surfaces with a mild, non-abrasive detergent (e.g.
409
or
Fantastic,
diluted with water
to 50/50).
•
Do not use any alcohol or ammonia-based cleaners.
•
To avoid damage to component surfaces, observe the instructions for detergent use.
