Product installation and handling
Safety Precautions (1/2)
01. Electrical work must be performed by a qualified and licensed electrician.
02. Be sure to perform the construction and grounding work in accordance with the technical standards
and instruction manual.
03. Make sure to ground the product and mounting platform properly. Incomplete grounding may cause
product damage, electric shock or fire.
04. Be sure to install the product only after the grounding work installation pole and stand is completed.
Otherwise, it may cause product damage, electric shock, or fire.
05. In order to prevent the danger of electric shock, cut o the main power and con rm that there is no leakage current before installing.
06. Make sure to turn o the power so there is no leakage current when binding the LED xture. There is a possibility of LED chip damage due to no-load
voltage.
07. If power is supplied without reliable insulation, there is a risk of product damage, electric shock or fire.
08. Insu cient construction may cause accidents such as product damage, poor insulation, flooding smoke, ignition, electric shock or falling.
09. Safety wire must be installed to avoid injury from falling and product damage.
10. Install the power box with the AC cable gland at the bottom. If installed in a direction other than speci ed, it may cause product damage, electric
shock or fire.
11. Do not pull the product cable or cut it arbitrary. It may cause product damage, poor insulation, flooding, electric shock or fire.
Document Revision V 1.0 20200721 Copyright © 2017 Wooshin Press Lighting Inc. All rights reserved. / www.wsled.co.kr
WSG-P
Series
Installation Guide
LED Sports Flood Lighting
Model : WSG-P960 (Remote Driver type)
