WSP-R350 Rev. 1.0
http://www.woosim.com
20
When you press
FEED Button
once again,
Power Lamp
flickers 5 times
and
Error Lamp
flickers once.
Press
POWER Button
once,
Error Lamp
flickers twice.
And then the density has set to
2 stop bit
.
When you press
FEED Button
once again,
Power Lamp
flickers 6 times
and
Error Lamp
flickers once.
Press
POWER Button
twice,
Error Lamp
flickers 3 times.
And then the density has set to
Density high
.
When you press
FEED Button
once again,
Power Lamp
flickers 7 times
and
Error Lamp
flickers twice.
Press
POWER Button
once,
Error Lamp
flickers once
And then the mark has set to
Mark no use
.
When you press
FEED Button
once again,
Power Lamp
flickers 8 times
and
Error Lamp
flickers once.
Press
POWER Button
once,
Error Lamp
flickers twice
And then the sensor has set to
Sensor medium1
.
When you press
FEED Button
once again,
Power Lamp
flickers 9 times
and
Error Lamp
flickers five times.
Press
POWER Button
once,
Error Lamp
flickers once
And then the power down has set to
Power down no use
.
If all the mode have set, press the
POWER Button
and the
FEED Button
at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
(Bluetooth / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high /
Mark no use / Sensor medium1 / Power down no use)
If the status is not correct, please try it again according to the procedure.
