than mentioned in the manual or recommended by the supplier might cause its damage and injury.
-
Use the electric tool, accessories and work tools, etc. according to these instructions and in a prescribed
way for the specific electric tool, regarding the work conditions and kind of work. Use of a tool for pur poses
other than it’s designed for might cause dangerous events.
5) SERVICE:
-
Please let the qualified person repair your electric tool with identical spare parts. This way you’ll secure
the same safety level of the electric device as before it’s repair.
SAFETY INSTRUCTONS FOR ELECTRIC TILLER
-
Read these instructions carefully. Get to know the controls and the correct use of the tiller.
-
The product is not intended for use by persons (including children) whose physical, sensory, mental
disability or lack of experience and knowledge prevents the product from being used safely unless
supervised or instructed by the person responsible for their safety to use the appliance. Beware of children
to ensure that they do not play with the product.
-
Never allow children or persons unfamiliar with this instruction manual to use the tiller.
-
While using the electric tiller other persons or animals are not allowed within 3
-
meter range.
-
The operator or user is liable for accidents and damages caused to other persons or damage to their
property.
-
Use the electric tiller only in daylight or good artificial light.
-
Do not work with the electric tiller when you are barefoot or wearing open sandals. Always wear sturdy
shoes and long pants when working.
-
Thoroughly inspect the site of use and remove any items that could be thrown by the machine.
-
Before use, always visually inspect the tiller blades whether they are not worn or damaged. For
preservation, replace worn or damaged elements and the screws in sets.
-
Always ensure a firm stance on the slopes and do not operate the cultivator on steep slopes.
-
While working you have to walk and do not run.
-
Be careful when starting the engine and follow the manufacturer's instructions, keeping the feet and the
blades out of the way.
-
Do not reach under or near rotating parts with your hands or feet.
-
Never lift or carry the machine while the engine is running.
-
Under any circumstances do not perform any changes to the device. Unauthorized changes could
adversely affect safety of your device and result in increased noise and vibration.
-
Switch off the electric tiller and remove the electric plug from the socket:
a) every time you move away from your device,
b) when you want to remove dirt blocking the device,
c) during inspection, cleaning or performing other actions on the device(repairing it),
d) if it starts to vibrate abnormally (check immediately).
-
Check and maintain tightness of all nuts and bolts and ensure safe operation of the machine.
-
For safety purpose, replace worn or damaged parts.
ASSEMBLY
-
Attach the lower part of the handle (9) to the corresponding slots on the device as shown in fig. 2.
-
Insert the fixing screws into the corresponding holes and tighten them with the wing nuts (12).
-
Attach the top of the handle (8) to the bottom of the handle (9) as shown in fig. 3
-
Insert the fixing screws into the corresponding holes and tighten them with the wing nuts (13).
-
Install the blade (10) and tighten with screws (14) as shown in fig. 4.
OPERATION
-
Before each use, check the safe condition of the device:
•
Check for visible faults.
•
Check that all parts of the machine are securely mounted.
