of liquid contact with eyes, see a doctor. Battery fluid can cause skin irritation and burns.
A battery should never be opened. This causes a risk of short circuit.
The battery should not be exposed to a heat source (eg, fire, sunlight). This causes a
risk of explosion.
A battery should never be bypassed. This causes a risk of explosion.
If the battery is damaged or used improperly, toxic fumes may be emitted.
These vapors are irritating to the respiratory tract. In case of discomfort, ventilate the
room well and see a doctor. If the power cord from the charger is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified person in order to
avoid danger.
Safety Information: Shear box
Be careful to never touch the blades. Do not touch the material to be cut with your
hands, do not try to remove the debris as the blades are moving. Always turn off the
device before removing a piece blocked.
When using a power tool, a simple moment of inattention to cause serious injury.
Wait for the complete cessation of blades before transporting the unit, always take it
by the handle. Always replace the blade cover before storing or transporting the unit.
Proper handling of the device reduces the risk of injury with the blades.
The cable must stay away from the work area. If it is hidden in the grass or bushes to
be cut, it may be accidentally cut.
Special safety-bushes for size:
- Keep any part of the body of the cutting blade. Do not remove the material being cut
or not to hold the material to be cut when the blades are moving. Ensure that the switch
is closed when disposing of the material trapped. A moment of inattention in use of
size-bushes can cause serious personal injury.
- Wear the shear box by the handle, the cutting blade is stationary. During transport or
storage of size-bushes, always cover the cutting of the shroud. Proper handling of size-
bushes, reduce the possibility of personal injury from the cutting blades.
- Hold the tool only by the gripping surfaces isolated because the cutting blade can
make contact with the wiring or own invisible cord from the tool. The cutting blades in
contact with a wire "live" can also put "live" exposed metal parts of the power tool and
electric shock to the operator.
- Keep the cord away from the cutting area. During operation, the cable can be hidden
in bushes and being accidentally cut by the blade.
- Always check for the presence of foreign bodies in the hedge, as the son of iron
fences, for example.
- Always use a residual current device with a breaking current is less than or equal to
30 mA
- Hold the correct size-bushes, for example with both hands if it has two handles.
Summary of Contents for WPGT306
Page 1: ......
