ELECTRIC TILLER/CULTIVATOR
OPERATING
- The electric tiller is designed for soil loosening and tillage in horticulture on small to medium -sized
cultivated areas, home gardens and for the maintenance of green areas.
- The electric tiller is not designed for use on public playgrounds, parks, sports centers, on the road, in
agriculture or forestry. The machine must not be used for breaking stones or plowing grass!
Use the device only for its intended purpose. Any other use is considered a case of misuse. The user /
operator and not the manufacturer will be responsible for any damage or injury caused by this misuse. Please
note that this device has not been designed for commercial or industrial use. The warranty will not be valid
if the equipment is used for commercial, industrial or similar purposes.
TECHNICAL SPECIFICATIONS
VOLTAGE/ FREQUENCY
230 V / 50 Hz
POWER
1 500 W
NO LOAD SPEED
28 500 rpm
WORKING WIDTH
450 mm
WORKING DEPTH
180 mm
BLADE MATERIAL
metal
BLADES TURN SPEED
200 rpm
NUMBER OF BLADES
6
PROTECTION CLASS
II
PARTS OF THE PRODUCT
1a
Right handle with locking button and strain relief mechanism for extension cable
1b
Left Handle
2
Power cable
3
Plastic cross-plate
4
Wing nuts and screws for fixing the handle
5
Support arch
6
Power cord clamp
7
Ventilation holes
8
Engine housing
9
Gearbox
10
Drive shaft
11
Blades
12
Trigger
13
Lock button
14
Transport wheels
EXPLANATION OF SYMBOLS
- The electric tiller must be handled with utmost caution. For this reason, the machine is labeled and marked
to alert the operator on the type of hazard.
- Warning labels and symbols are part of the machine and must not be removed under any circumstances.
WARNING:
Keep the warning labels clean and visible on the machine. Replace the warning labels if they are
missing or illegible.