BLR2 MKII
USER MANUAL
VERSION 1.0
BLUELINE DIGITAL MKII SERIES
www.workpro.es
9
Device description
1.
Reset button. Take the device to its factory configuration
2.
Next button. It allows to advance between and through the different screens of the
display.
3.
Display. It shows different features of the device.
4.
Set button. It allows access to a certain display screen and set the digits of the different
screens.
5.
GPIOs: GPIOs connection ports. 3-pin Euroblock connector with 2xGPO plus GND
and 3-pin Euroblock connector with 2xGPI plus GND.
6.
LAN port. Connection port to the local network, RJ45.
7.
Main supply input. 12/24 Vdc
8.
Control. Connection port for the BLC 1wallmount controller (RJ 45)
9.
Analog audio output. Unbalanced or balanced audio output, (depending on the
extraction method), 3-pin Euroblock of 5.08 mm.
On the front of the device you will find a display through which you can view or modify different
parameters of the unit.
To navigate between the different parameters press the NEXT button if you want to edit any of
these parameters, press the SET button to access it. Next, specify which parameters are editable
and which are not:
-
STATIC IP, editable.
-
DYNAMIC IP, not editable.
-
MAC, not editable
-
SRC, editable.
-
VOL, editable
4.2.1.
Display
