BLS2 LITE MKII
USER MANUAL
VERSION 1.1
BLUELINE DIGITAL MKII SERIES www.workpro.es
7
1.
Reset button. Take the device to its factory configuration
2.
Next button. It allows to advance between and through the different screens of the
display.
3.
Display. It shows different features of the device.
4.
Set button. It allows access to a certain display screen and set the digits of the different
screens.
5.
LAN port. Connection port to the local network, RJ45.
6.
Main supply input. 12/24 Vdc
7.
Analog audio input. Unbalanced audio input, 3-pin Euroblock of 5.08 mm.
On the front of the device you will find a display through which you can view or modify different
parameters of the unit.
To navigate between the different parameters press the NEXT button if you want to edit any of
these parameters, press the SET button to access it. Next, specify which parameters are editable
and which are not:
-
STATIC IP, editable.
-
DYNAMIC IP, not editable.
-
MAC, not editable
-
SRC, editable.
STATIC IP, this is the static IP address. The device has a static IP address by default in the
subnet 10.0.0.0/8. For editing, use the SET (to select and set the digit) and NEXT (for editing
upwards) buttons.
NOTE: After a change, the device restarts to confirm the value.
DYNAMIC IP, this is the dynamic IP address of the device, which is assigned by a DHCP server.
MAC, this is the physical address of the device.
4.2.1.
Display