DESCRIPTIONS
Check for transport damage.
You should be in possession of the following items:
1x MINIDIM 1
1 Manual
Should you discover transport damage after unpacking the
equipment, inform the hauler immediately. Never connect a
DELIVERY PACKET
damaged device. You may also contact your supplier.
TECHNICAL SPECIFICATIONS
Operation temperature
Control Protocol
Dimensions
Weights
-10ºC to +50ºC
DMX-512 (1990)
200g
Power Requirement
12~24 V DC
*Please Note: Improvements and specifications in the design of the unit and the manual are subject to
change without any prior written notice.
OPERATION GUIDE
1.DMX Control Mode(DMX Addressing)
DMX is short for Digital Multiplex.This is a universal binary language used as a form of communication between
intelligent fixtures. Each DipSwitch represents a binary value.
In this mode, the dip-switch 10 is flipped to the"
"position, 11 & 12 IN “OFF”. DMX address can
be addressed using dip 1 to 9 and the intensity of LED production is dimmable.
ON
Read this manual carefully before using our
MINIDIM 1
. As a signal channel dimmer, the
MINIDIM 1
is a combination of a control interface and tension provider for our
LEDLINE 100 WHITE
modules as a LED fixture for
application. A maximum of up to 6A loads are allowed on a single output, DMX address enables to be addressed by
flipping the dip-switch.The dimmer is available in DMX Control Mode, Manual Dim Mode and features 0-10V analog
input. The intensity of LED product can be dimmed in the Manual Dim Mode.
Input
2-pin terminal connector for Power In
2-pin terminal connector for Analog In
3-pin terminal connector for DMX In
Output (6AMax.)
3-pin terminal connector for DMX out
4-pin terminal connector for LOAD (Double output)
90(L)x40(W)x20(H)mm
MINIDIM 1 User Manual/Manual de uso Page 1
