(*) Power Taps (70V)
.................................
Power Taps (100V).................................
Ω)
Ω)
Ω)
Ω)
Low Impedance position..........................
8Ω (60W)
Sensitivity (1W/1m) ..................................
73 dB
Max. SPL ..................................................... 90 dB
Frequency Response ..............................
70Hz - 20kHz
Elements....................................................
6.5" 1" Tweeter
Dimensions .............................................. 225 x 300 x 200 mm
Material (enclosure) .................................
ABS plastic
Material (grille) .........................................
Weight ....................................................... 4,8 Kg
2W(2k45Ω)/4W(1k22Ω)8W(612Ω)/16W(306Ω)
4W(2k5
/8W(1k25
/16W(625
/32W(312
(*) The power taps indicated on the selector switch are calculated for 100V line. In the case of 70V line installation, each power
tap will correspond to half the value
Specifications are subject to change without notice
Aluminium
The power tap is
the 5
position rotary switch to the desired tap.
selected by rotating
The connection is made through Binding Post terminals.
Ensure the correct polarity is observed.
Make sure to select the correct power tap
position before connecting the loudspeaker
to a 70/100V line amplifier. If the low
impedance position (8Ω) is selected, the
loudspeaker could be damaged!
A STUDIO 40 LINE
carton contains
two loudspeakers (black or white) and two metallic
wall-mount brackets.
STUDIO 40 LINE
225
300
200
4
User Manual/Manual de Uso STUDIO Series
EN
