2. Operation Guide
2.2 Dim/Switch Pack Mode
1. When the desired DMX addresses are complete,
you can enter the next mode by pressing Menu
button. The segment display will show " d--- ", it
means the Dim Pack Mode is activated now.
2. You can change Dim/Switch Mode by tapping the
Up or Down button. And the segment display will
show "S---", it means the Switch Pack Mode is
activated now.
3. Press Menu button to confirm and enter Switch
Pack Mode consisting of Switch On(S-on) and
Switch Off(S-of).
In the Switch On Mode, output is turned on and
the fixture lights regardless of DMX signal.
MENU
DMX Address
Dim/Switch
Dim Preset
Dim Limit
---
MENU
DMX Address
Dim/Switch
Dim Preset
Dim Limit
DMX
---
MENU
DMX Address
Dim/Switch
Dim Preset
Dim Limit
LOCAL DIM
(HTP)
LOCAL DIM
(HTP)
Max
Max
Min
Min
In the Switch Off Mode, output is turned off and
the fixture is controlled by DMX signal. When DMX
level is less than 40%, the fixture goes out; when
DMX level exceeds 40%, the fixture lights. You can
adjust the level by adjusting the Local Dim Knob.
User Manual / Manual Page/Página 6
DMX
DMX
Summary of Contents for UNIDIM 1
Page 1: ...User Manual Manual de Uso Rev 140801 UNIDIM 1 ...
Page 23: ......
