14
Technical data:
Power consumption 1,200 WATT
Protection class II
Rotational speed 16,000-30,000 min
-1
Ear protection, protective goggles, dust mask
Lift height 50 mm (routing depth)
and gloves and wear gloves
Collet chuck Ø 8 and Ø 6 mm
Do not use in the rain,
Max. router diameter 30 mm
Protect against wetness
Sound pressure level L
PA
91 dB(A)
Keep other persons at a distance
Noise level L
WA
102 dB(A)
Read operating instructions
Oscillation emission:
AHS, Uhlandstraße 50, A-4600 Wels
Handle on the right 2.7 m/s²
Handle on the left 3.7 m/s²
Uncertainty K = 1.5 m/s
2
Nominal voltage 230 V ~ 50 Hz
Emission
1. Noise emission L
PA
according to 6.1.2 (91.0 dB(A))
Uncertainty K
PA
3dB(A)
2. Noise emission L
WA
according to 6.1.2 (102.0 dB(A))
Uncertainty K
WA
3dB(A)
3. Wear hearing protection. Wear personal noise protection e.g. ear plugs
Intended use
The router is intended for milling and copy-milling flutes, angles, profiles and slotted
holes in wood, plastic and light-weight building materials on a firm surface.
Only use this machine according to its intended use! Any use extending beyond this does
not constitute intended use. The user, not the manufacturer, is liable for resulting damages
or injuries of any kind.
Our equipment is not intended for commercial or industrial use. If this device is used in the
context of commercial or industrial use, the warranty is void.
When using tools some safety precautions must be observed to prevent injuries
and damage. Therefore read through the operating manual/ safety instructions
carefully. Store them in a safe place so that the information is available to you at
all times. If you should hand the appliance on to other persons please hand these
operating instructions/safety instructions out with them. We do not assume any
liability for accident or damage which do not arise due to the failure to observe
these instructions and the safety instructions.
1192734_BDA_WB_1200 OF.indd 14
1192734_BDA_WB_1200 OF.indd 14
28.12.20 09:13
28.12.20 09:13
