4. Use and treatment of the power tool
a. Do not overload the power tool. Use the power tool that is designed for your
work. With the suitable power tool you will work better and with more safety in the
specified performance range.
b. Do not use any power tool with a defective switch. A power tool that can no longer
be switched on or off is dangerous and must be repaired.
c. Pull the plug out of the socket and/or pull out any removable batteries before
making device settings, changing insertion tool parts, or putting the power
tool away. This precautionary measure prevents the device from starting up
unintentionally.
d. When they are not in use, store power tools out of the reach of children. Persons
who are unfamiliar with the power tool or who have not read these instructions
must never be allowed to use it. Power tools are dangerous when used by
inexperienced persons.
e. Maintain power tools and insertion tools with care. Ensure that moving parts
of the power tool function properly and do not jam and check whether parts
are broken or are damaged in such a way that the device function is impaired.
Have the damaged parts repaired before using the power tool. Many accidents
are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp
cutting edges jam less often and are easier to control.
g. Use power tools, insertion tools, etc. according to these instructions. Give due
consideration to work conditions and the task to be executed. Using power tools
for applications other than their intended use can lead to dangerous situations.
a. Keep the handles dry, clean and free of oil or grease. Slippery handles and grip
surfaces do not allow safe operation and control of the power tool in unforeseen
situations.
5. Service
a. Only have your device repaired by qualified, specialised personnel, and only
repair it using original replacement parts. This maintains the safety of the power
tool.
Special Safety Instructions
Immediately switch the machine off if it becomes jammed.
19
1196984 BDA WB 250 KSM.indd 19
1196984 BDA WB 250 KSM.indd 19
17.11.20 09:54
17.11.20 09:54
