8
Before placing the device in operation
Mount the support bracket on the front part of the hot glue gun. Before plugging the
power cord into the wall outlet, fold the bracket forward so that it snaps securely into its
max. front position.
Always place the hot glue gun on a non-flammable surface.
Placing the device in operation
Insert a glue stick all the way into the chamber of the hot glue gun. Please wait for the
device to warm up for about 5 minutes after connecting it to the power outlet. Now the
hot glue gun is ready for use.
You can now apply the adhesive by pressing the lever. Press both surfaces together
immediately and apply pressure.
Always place the hot glue gun on its support bracket each time you interrupt your work
or after you have finished gluing.
Service and care
Attention! Pull the mains plug before all cleaning work.
• Don‘t use solvents of any kind to clean the plastic parts. Different chemicals can corrode
and damage these parts.
• Only use a clean cloth to remove dirt, oil, grease, dust etc.
• The ventilation slits must be kept free of debris at all times!
