background image

4

5

1

6

2

8

11

12

13

3

14

7

9

10

Instruction #1

Deluxe Spot Sprayer Instructions:

 

 

3.0 --Install Gauge (item 5) in fitting as illustrated using a good

        grade thread sealant to prevent leaks.
3.1 --Insert Lead Wire Assembly (item 14) into plug at rear of Pump.
3.2 --Join the red wire of the two-wire cable to a +12V source on

        the garden tractor, such as a switch, ammeter, or the positive 

        battery post. The Black wire (of the two-wire cable) should be

        grounded or connected to the negative battery post.
3.2a --An additional lead is supplied with the Lead Wire Assembly that will allow the use of a  standard 12V receptacle on the vehicle.

         This can be used as an alternate to the battery clips. 

DESCRIPTION

STOCK

QTY

ITEM

25 Gallon Tank

600132

1

1

2.0 GPM 12V Pump

600183

1

2

QD Cross Fitting

600211

1

3

Y-Garden Hose Valve

600122

1

4

Gauge 0-100 PSI

600129

1

5

Relief Hose Assembly

600213

1

6

EL38QD P Fitting

600185

1

7

N3400 P Fitting

600154

1

8

Spray Wand Clip

600151

2

9

Wand Clip Screw

600152

2

10

Tank Lid

600133

1

11

Tank Lid Tether

600134

1

12

Spray Wand and Hose Assembly

600156

1

13

Lead Wire Assembly with  Switch (96”)

600153

1

14

Parts List

— GENERAL ASSEMBLY

PRECISION SPRAY EQUIPMENT, a divison of Green Leaf, Inc.   9490 N BALDWIN ST   FONTANET, IN 47851   www.grnleafinc.com

a division of Green Leaf, Inc

®

P R E C I S I O N   S P R AY   E Q U I P M E N T

PSE

Summary of Contents for ATV 2522









Reviews: