The ratchet straps provided are specifically design to attach a spot sprayer to the rear rack of most common ATV’s. Please refer to the following illustrations for proper
mounting instructions.
CAUTION: ALWAYS CHECK THE ATV LOAD RATING BEFORE USING THE SPRAYER. EXCESSIVE WEIGHT MAY CAUSE YOUR ATV TO ROLL OVER OR TIP ON UNSTABLE
SURFACES OR DURING ACCELERATION. SERIOUS INJURY COULD RESULT FROM IMPROPER USE. ALWAYS FOLLOW THE ATV MANUFACTURERS RECOMMENDATIONS.
Front ATV Rack Bar
Rear ATV Rack Bar
Custom ATV Tank Strap Installation Guide
Tighten ratchet to
secure tank to ATV
Hook #1
Hook
#2
D-Ring
Closed loop in strap
with Hook #1
and D-Ring
1. Lay ratchet strap over tank, per diagram
TANK-- END VIEW
2. Attach Hook #1 to front ATV rack bar
3. Run loose tail of strap first thru the D-ring
then thru Hook #2 and back to the rachet.
(follow the arrows below)
4. Attach hook #2 to rear ATV rack bar
5. Tighten rachet to secure tank to ATV
Locked
Position
UnLocked
Position
