background image

ATV 25BL

PSE-PRECISION SPRAY EQUIPMENT

®

, a divison of Green Leaf, Inc.   9490 N BALDWIN ST   FONTANET, IN 47851   www.green-leaf.us   800-654-9808

a division of Green Leaf, Inc

®

P R E C I S I O N   S P R AY   E Q U I P M E N T

PSE

®

®

Assembly / Operation Instructions / Parts

WORKHORSE

WORKHORSE

S   P   R   A   Y   E   R   S

by PSE®, a Division of Green Leaf, Inc®

by PSE®, a Division of Green Leaf, Inc®

®

— GENERAL INFORMATION

— WARRANTY / PARTS / SERVICE

DELUXE ATV BOOMLESS SPRAYER

— ASSEMBLY

Tools required:

 

1 – 7/16” End Wrench

 

1 – 3/16” Allen Wrench 

 

1 – Phillips Screwdriver

 

1 – Thread Sealant

The purpose of this manual is to assist you in assembling,

operating and maintaining your lawn and garden sprayer.

Please read it carefully as it furnishes information which

will help you achieve years of dependable trouble-free

operation.

Workhorse products are warranted for one year from the date of 

purchase against manufacture or workmanship defects for personal 

or homeowner usage with proof of purchase. Workhorse products 

are warranted for 90 days for commercial users. Any unauthorized 

modification of a Workhorse brand sprayer will void warranty.

 

Your authorized dealer is the best source of replacement 

parts and service. To obtain prompt, efficient service, 

always remember to give the following information:
1.  Correct part description and part number.

2.  Model number of your sprayer.
Part description and part numbers can be obtained from the illu-

strated parts list section of this manual.
Whenever you need parts or repair service, contact your distributor/ 

dealer first. For warranty work always take your original sales slip, 

or other evidence of purchase date, to your distributor / dealer.

Polyethylene Tank

12 Volt Diaphram Pump

4.0  G.P.M.

Lever Handgun

15 Ft. of 3/8” Hose (handgun)

Pressure Gauge

Adjustable Pressure range (0-45 PSI Max.)

2 Nozzle Boomless Tips

Quick Detach Spray Boom Feature   

Summary of Contents for ATV 25BL









Reviews: