— Pump & Valve Assembly
PRECISION SPRAY EQUIPMENT
®
, a divison of Green Leaf, Inc. 9490 N BALDWIN ST FONTANET, IN 47851 www.workhorsesprayers.com 888-433-6631
a division of Green Leaf, Inc
®
P R E C I S I O N S P R AY E Q U I P M E N T
PSE
®
PARTS LIST
DESCRIPTION
PART NUMBER
QTY
ITEM
2.2 GPM Pump
*
640451
1
1
5.0 GPM Pump
*
630031
1
1
Manifold Body
600289
1
2
Elbow (2.2 pumps)
600291
1
3
Elbow (
5.0 pumps)
600292
1
3
Gauge 0-100 PSI
600129
1
4
Inline Valve
600216
2
5
QD EL 12
600287
1
6
5/8" Hose Clamp
600120
2
7
1/2" Hose Clamp
600288
1
8
10-24 x 1.25 Screw
600130
4
9
Relief Hose Assembly
600213
1
10
Suction Hose Assembly
600315
3
11
Wand Hose Assembly
Relief Hose Assembly
Boom Hose Assembly
if equipped
The Lever adjusts the system pressure by
relieving liquid back to the tank. Adjusting
this lever will increase or decrease pressure
to both the spray wand and the spray boom.
The lever turns the spray
boom on and off
Install Wand Hose Assembly onto
Swivel Barb Assembly, by placing a
Hose Clamp over the open end of the
hose on the Wand Hose Assembly.
Then pressing the open end of the
hose onto the Swivel Barb Assembly
like shown. Secure in place by
tightening the Hose Clamp as shown.
7
Wand Hose Assembly
Boom Hose Assembly
1
1
4
3
2
0
5
6
8
1
9
7
1
*Pump included depends upon model purchased.
