3. PROPER USE
You can use the cordless hot glue gun to
glue the following materials: Wood,
plastics, textiles, cardboard, ceramics,
leather, etc.
The equipment is to be used only for its
prescribed purpose. Any other use is
deemed to be a case of misuse. The user
/ operator and not the manufacturer will
be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not
been designed for use in commercial,
trade or industrial applications. Our
warranty will be voided if the machine is
used in commercial, trade or industrial
businesses or for equivalent purposes.
4. TECHNICAL DATA
Power supply: 3.6 V DC
Heat-up time: approx. 100 seconds
Melting temperature: 150 °C (302°F)
Glue stick diameter: 7 mm(5/16")
Glue stick length: 100 mm((4")
Battery capacity: 2.6 Ah
Battery type: Lithium-ion
Weight: 0.2 kg
Charger for the product
Battery charge voltage: 5 V DC
Battery charge current: 1 A
Charging unit
supply voltag: 100-240V~ 50/60 Hz
Charging time: 2.5-3.5 hours
Caution!
Residual risks
Even if you use this electric power tool
in accordance with instructions,
certain residual risks cannot be rules
out. The following hazards may arise in
connection with the equipment’s
construction and layout:
1.Lung damage if no suitable protective
dust mask is used.
4
5. BEFORE STARTING THE
EQUIPMENT
Hazard!
Charge the equipment only with the
charger supplied. Only place the
equipment on non-flammable surfaces.
5.1 Charging the battery (Fig. 2)
The battery is protected from exhaustive
discharge.An integrated protective circuit
automatically switches off the equipment
when the battery is flat.
Note! Do not actuate the ON/OFF switch
any more if the protective circuit has
tripped. This may damage the battery.
Check that your mains voltage is the same
as that marked on the rating plate. Plug
the battery charger(8) in the plug socket
and connect the charging cable (7) to the
Micro USB charging port (6). The charging
process starts as soon as the charging
cable is connected to the charging
adapter.
The LED (2a) will light up red to indicate
that the battery pack is being charged.
When charging is finished, the LED (2a)
changes to green.
If no LEDs come on during charging, this
means that the battery pack is defective.
A defective battery is not allowed to be
used any more.
Important! The handle may become a
little warm during the charging process.
This is normal.
If the battery fails to charge, please check
• whether there is voltage at the socket
outlet
• whether there is good contact at the
charging contacts of the charging unit.
If the battery still fails to charge, please
contact with our online customer service
5.2 Inserting the glue stick (Fig. 3)
Push the glue stick (9) into the opening (B)
as far as the stop.
Summary of Contents for W125041A
Page 2: ......
Page 4: ...9 B 1 7 8 5 3 4 6 1 6 2a 2a 2b 2b 2 Fig 1 Fig 2 Fig 3...
