Workrite Sequoia Monitor Arm - Assembly Instructions
4
Workrite Ergonomics 800.959.9675 www.workriteergo.com
Attach Monitor Mounts to Monitors
3
b
a
Important Note
It is strongly recommended to use the mounting screws
provided by the monitor manufacturer if possible. Always use
the shortest screws possible to avoid damage to the monitor.
!
Center Monitor Mount:
Align the Center Monitor Mount (J) to the VESA
pattern in the monitor. Install 4 VESA Monitor
Screws (H) and tighten securely with a #2 Phillips
screwdriver.
Outer Monitor Mount:
Align the outer mounts (K) to the VESA pattern
in the monitors. Install 4 VESA Monitor Screws
(H) and tighten securely with a #2 Phillips
screwdriver.
Note: At this time you can chose to install the
monitors in landscape or portrait orientation.
Before mounting be sure to measure the vertical
height required for Portrait mounting as some
monitors may exceed the vertical height limit for
installation.
J
H
H
K
