1 of 2
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
ESSENTIA BASIC CONTROL
User Guide
ESSENTIA BASIC CONTROL INTERFACE
The Essentia Basic Control is more than just a switch. Please read the instruction completely before you begin.
THE BUTTONS
HEIGHT CONTROL UP AND DOWN
The UP and DOWN buttons are used for moving the table up and down when the user presses the button.
Height Control
INITIALIZING
INITIALIZING YOUR TABLE
You will need to initialize your table after initial installation or to reset after troubleshooting. Follow these steps to initialize your
Essentia Workcenter.
Step User input
1.
Press the
DOWN
button until the workcenter reaches the lowest position
2.
Press the
DOWN
button AGAIN and keep it pressed for about five seconds
3.
After about five seconds, the workcenter will move lower
4.
Release the
DOWN
button
The display has been initialized or reset.
Up
Down
