INSTRUCTIONS
Power unit must be equipped with ROPS or ROPS
cab and seat belt. Keep seat belt securely fastened.
Falling off power unit can result in death from being
run over or crushed. Keep foldable ROPS systems in
“locked up” position at all times.
TRACTOR AND SKID STEER
REQUIREMENTS AND
PREPARATION
——————————————————
SBMS-50 & SBMS-50 B/G MODELS:
The Model SBMS-50 is designed for walk behind mini-
skid steer units equipped with the mini universal type
quick-attach.
The SBMS-50 B/G Model is designed for the Bobcat
walk behind mini-skid steer Models MT50, MT52, and
MT55. It will also attach to the Bobcat S-70 and Gehl
1640E small cab type skid steers.
2160 & 2172 MODELS:
The Models SBS-2160, SBS-2172, SBJD-2160, SBJD-
2172, SBFL-2160 and SBFL-2172 are for most compact
tractor loaders up to 40hp. The SBS Models will also fit
smaller skid steer models up to 35 hp.
The Models SBS-2160 and SBS-2172 are designed to
mount on smaller skid steer units and tractor front load-
ers equipped with the universal quick-attach connection.
The Models SBFL-2160 and SBFL-2172 Snow Blades
are designed for compact tractor front-end loaders.
Optional mounting brackets are available for several
quick-coupler type front-end loaders or pin-on type
loaders.
The Models SBJD-2160 and SBJD-2172 Snow Blades
are designed for compact John Deere tractor front-end
200-300 series loaders.
The Models SBC-2160 and SBC-2172 are designed to
clamp-on the front loader bucket of compact tractors.
These blades can be attached or removed in just a few
minutes.
An optional hydraulic angle control kit is offered for the
2150, 2160 and 2172 Models (#360170).
13
2790A & 27108A MODELS
(continued)
:
The Models SBFL-2790A and SBFL-27108A are
designed for farm tractor front-end loaders. Optional
mounting brackets need to be ordered. They are avail-
able to fit most popular quick coupler front-end loaders or
pin-on type loaders.
The Models SBG-2790A and SBG-27108A Snow
Blades are designed for tractor front loaders with
Global/Ero Carrier System.
The Models SBJD-2790A and SBJD-27108A Snow
Blades are designed for John Deere 400 and 500 series
front loaders.
Optional hydraulic angle control and cross-over relief
kits are available for the SBS-2790A and SBFL-2790A
Models.
Models SBS-27108A and SBFL-27108A have hydraulic
angle control and the hydraulic cross-over relief as
standard equipment.
Snow blade Models 2790A and 27108A have side
oscillation so the wider blade can follow ground contour.
Hoses and flat face couplers from the snow blade to
the skid steer unit are included in kit #360165 only (skid
steer applications).
Since the length of hoses required from the front of
front-end loaders to the rear remote hydraulic outlets of
the tractor vary, these hoses and hydraulic couplers are
not included in kit #360168 (for front loader applications).
ALL MODELS:
The blade can be locked with two bolts so it can be
used for light dirt moving only. See page 20 for instruc-
tions.
NOTE:
• Blades are designed for moving snow and loose dirt
only. Do not abuse blades by prying rocks or stumps
with high impact loads.
• Skid Shoes should always be used for snow moving
applications.
• When moving snow, do not operate with the blade in
the locked position.
2790A & 27108A MODELS:
The Model SBS-2790A, SBS-27108A, SBG-2790A,
SBG-27108A, SBJD-2790A, SBJD-27108A, SBFL-2790A,
and SBFL-27108A Snow Blades are for most skid steer
and tractor front loaders rated from 30 to 80 hp.
The Models SBS-2790A and SBS-27108A are
designed to mount on skid steer units and tractor front
loaders equipped with the universal quick-attach attach-
ment connection.
WARNING
Summary of Contents for SBC-2160
