background image

2

17

LIMITED WA R R A N T Y

Worksaver warrants to the original purchaser of any new Pallet Fork (Models SSPF-3742 and SSPF-3748),

that the equipment be free from defects in material and workmanship for a period of six (6) months for non-

commercial, state, and municipalities. Use sixty (60) days for commercial use from date of retail sale.

Replacement or repair parts installed in the equipment covered by this warranty are warranted for sixty (60)

days from the date of purchase of such part or to the expiration of the applicable new equipment warranty

period, whichever occurs later.

Such parts shall be provided at no cost to the user during regular working hours.  Worksaver reserves the right

to inspect any equipment or parts which are claimed to have been defective in material or workmanship.

DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES

Worksaver’s obligation under this warranty, to the extent allowed by law, is in lieu of all warranties, implied or

expressed, including implied warranties of merchantability and fitness for a particular purpose and any  liability

for incidental and consequential damages with respect to the sale or use of the items warranted. Such

incidental and consequential damages shall include but not be limited to:  transportation charges other than

normal freight charges; cost of installation other than cost approved by Worksaver; duty; taxes; charges for

normal service or adjustments; loss of crops or any other loss of income; rental of substitute equipment,

expenses due to loss, damage, detention or delay in the delivery of equipment or parts resulting from acts

beyond the control of Worksaver.

THIS WARRANTY SHALL NOT APPLY:

1. To vendor items which carry their own warranties, such as hydraulic cylinders, tires, and tubes.

2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident.

3.  If parts not made or supplied by Worksaver have been used in connection with the unit, if, in sole judge-

ment of Worksaver such use affects its performance, stability, or reliability.

4. If the unit has been altered or repaired outside of an authorized Worksaver dealership in a manner which,

in the sole judgement of Worksaver affects its performance, stability or reliability.

5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid,

worn blades, or to normal deterioration of such things as belts and exterior finish, due to use or exposure.

6. To expendable or wear items such as teeth, chains, sprockets, belts, springs and other items that in the

company’s sole judgement is a wear item.

NO EMPLOYEE OR REPRESENTATIVE OF WORKSAVER IS AUTHORIZED TO CHANGE THIS WARRANTY IN

ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN WRITING AND SIGNED

BY WORKSAVER’S SERVICE MANAGER, POST OFFICE BOX 100, LITCHFIELD, ILLINOIS  62056-0100.

SSPF-3742 & SSPF-3748

PA RT S   D R AW I N G

Summary of Contents for SSPF-3748





















Reviews:

Related manuals for SSPF-3748